How do you make blueberry jelly?
Blueberry jelly is made from strained blueberry juice, cooked with lemon juice, sugar, and pectin until it sets. Blueberries are naturally low in pectin, so a firm jelly depends on added pectin, the right amount of sugar, and a proper full rolling boil.
Ingredients
- Blueberries. Fresh or frozen. Home recipes usually use about 9 to 12 cups of berries, plus a small splash of water, to make about 4 cups of strained juice. The yield changes with how juicy the berries are, so measure the juice rather than the berries.
- Lemon juice. About 2 tablespoons of bottled lemon juice, for acidity and flavour.
- Powdered pectin. One box (about 1.75 ounces) of regular powdered pectin, or the amount on your package.
- Sugar. Use the amount printed on the pectin package for the juice volume you measured. Regular pectin needs a lot of sugar to set, and amounts in online recipes vary widely.
- Optional: about ½ teaspoon of butter, to reduce foaming.
Step by step
- Extract the juice. Wash the berries and put them in a large pot with a small amount of water. Bring to a boil, mash them, and simmer for 10 to 15 minutes until soft.
- Strain. Pour the mixture through a jelly bag or a double layer of cheesecloth set over a bowl. Let it drip without squeezing, so the jelly stays clear.
- Measure and heat. Measure the juice. Pour it into a large pot, add the lemon juice, the pectin, and the butter if you are using it. Bring to a full rolling boil over high heat, stirring constantly.
- Add the sugar. Stir in the sugar all at once. Return to a full rolling boil, then boil hard for exactly one minute, stirring the whole time.
- Skim and jar. Remove from the heat and skim off the foam. Ladle the hot jelly into hot jars, leaving 1/4-inch headspace. Wipe the rims, add lids, and screw on the bands until finger-tight.
- Process or refrigerate. For pantry storage, process in a boiling water canner using a tested time for your jar size and altitude. For refrigerator storage, skip processing and keep the jars cold.
- Cool and check. Let the jars rest undisturbed for 12 to 24 hours. Check that the lids have sealed by pressing the centre. A sealed lid does not flex.
Getting a good set
- Measure accurately. A wrong amount of juice, pectin, or sugar is a common cause of a soft set.
- Boil hard. A full rolling boil keeps bubbling even when you stir it. Time the minute from when the boil returns after the sugar goes in.
- Do not double the batch. Home jam makers often warn that doubled batches fail to set. Make the batch size the recipe gives, and cook two batches if you need more.
- Use fresh pectin. Old pectin can lose strength. Check the date on the box.
- Test before you jar. Use a cold plate: spoon a little jelly on a chilled plate, wait about 30 seconds, and push it with a fingertip. A wrinkle means it is set.
If the jelly still runs after cooling, see how to thicken up jelly without pectin.
Storage
- Pantry: Sealed jars kept cool and dark can keep for up to about a year.
- Refrigerator: Once a jar is opened, refrigerate it and use it within a few weeks. Sources vary, so check your recipe.
- Unprocessed jars: Keep them in the refrigerator, not the pantry.
FAQs
Why is my blueberry jelly runny? Common causes are measuring the juice or sugar wrong, not reaching a full rolling boil, using old pectin, or stopping the cook too early. Re-cook it for shelf storage using a tested method, or keep it refrigerated.
Can you use frozen blueberries? Yes. Frozen berries can release more liquid as they thaw, so measure the juice after it has been strained.
What is the difference between blueberry jam and jelly? Jelly is made from strained juice, so it is clear and smooth. Jam is made from crushed fruit, so it keeps the pulp.
For a pectin-free method, see how to make jelly without pectin. For a related fruit with a different set, see cherry jelly.